9 Best Programmable Line Voltage Thermostats (November 2026)
The best line voltage programmable thermostats include the Honeywell TL7235A1003 Line Volt Pro Non-Programmable Digital for simple non-programmable digital control, the BOWSEN Programmable Thermostat for House Radiant Underfloor for radiant underfloor floors, and the Mysa Smart Thermostat LITE for Electric Baseboard for smart scheduling and remote control.
On this page (9 sections)
- Programmable line voltage thermostat picks for each heater type
- Best line voltage programmable thermostat comparison: load, wiring and controls
- How we compared these line voltage thermostats
- Can a line voltage programmable thermostat replace a mechanical thermostat? Choose by routine
- What voltage and load range do you need for line voltage electric heat?
- How many wires does your line voltage thermostat need?
- Which heater type does each thermostat fit: baseboard, radiant, convector or fan-forced?
- How should you set up and care for a line voltage programmable thermostat?
- The best line voltage programmable thermostat for your home
The best line voltage programmable thermostat for radiant floors is the BOWSEN, and the best smart option for baseboard heat is the Mysa LITE. Our score weighs specs, features and buyer feedback against what you're shopping for.
A line voltage thermostat controls the heating circuit directly, so the load and wiring checks matter more than app features. If you are new to the category, start with [What Is a Line Voltage Thermostat?
The Basics](/what-is-a-line-voltage-thermostat/) before you compare schedules.
Programmable models help when your day has a pattern. A setback while you are out and a warm-up before you return can cut runtime without leaving the house cold.
Non-programmable models still suit steady routines, small spaces and rooms where one setting all day works fine.
Use this guide to match the thermostat to the heater first. Check voltage, load, wire count and whether the heater is baseboard, convector, fan-forced, cable, ceiling or radiant floor.
Then choose the control style: schedule only, smart app control, or simple set-and-hold.
Our picks at a glance
-
1
Best for simple non-programmable digital controlHoneywell TL7235A1003 Line Volt Pro Non-Programmable Digital
9.6/10 our score
See it on Amazon -
2
Best for radiant underfloor floorsBOWSEN Programmable Thermostat for House Radiant Underfloor
9.3/10 our score
See it on Amazon -
3
Best for smart scheduling and remote controlMysa Smart Thermostat LITE for Electric Baseboard
9.2/10 our score
See it on Amazon
- 4
Check itHoneywell Aube Technologies TH115-A-120S 7-Day Programmable Line
Best for straightforward 7-day line voltage programming - 5
Check itHoneywell Home X2P Programmable Thermostat
Best for low-voltage systems, not line voltage heat - 6
Check itStelpro Line Voltage Thermostat
Best for simple baseboard and convector setback - 7
Check itLUX PSP511LC Programmable Thermostat
Best for low-voltage 5-2 programming, not line voltage - 8
Check itLUX ELV4 Programmable Line Voltage Thermostat
Best for budget 5-2 line voltage schedules - 9
Check itKING ES230-R MAX22 Electronic Line Voltage Non-Programmable
Best for larger non-programmable heating circuits
Programmable line voltage thermostat picks for each heater type
The best pick changes with the heater. Radiant floors need floor sensing, baseboards often benefit from smart schedules, and larger circuits need a higher amp rating.
The sections below keep those jobs separate so you do not buy a schedule for a heater that needs a different load.
Honeywell TL7235A1003 Line Volt Pro Non-Programmable Digital: Best for simple non-programmable digital control
- Non-programmable digital control
- 240-volt heating application
- 40 to 86 F control range
- On-demand backlight and heating indicator
A clear non-programmable option for a 240-volt heating circuit when you want set-and-hold digital control and no schedule to manage.
Pros
- Clear digital display with backlight
- Heating indicator confirms heat is on
- Soundproof operation reduces clicking
Cons
- Not programmable
- 240-volt heating application only as described
This Honeywell suits a room where you want clear digital control without a schedule. It is a 240-volt heating thermostat with a 40 to 86 F control range and 15A full load at 240VAC.
That load figure is the first check for any replacement.
In daily use, the on-demand backlight helps in dim light. The heating indicator confirms at a glance that heat is on.
Honeywell says soundproof operation reduces the clicking heard with conventional thermostats.
The trade-off is plain: it is non-programmable. If your routine is steady and you prefer one setting, that simplicity is a plus.
If you want setbacks while out, look at the programmable picks below.
BOWSEN Programmable Thermostat for House Radiant Underfloor: Best for radiant underfloor floors
- 7-day programmable scheduling
- 120/240V dual sensing
- 15A maximum current
- Built-in Class A GFCI
Built for radiant underfloor heat with 7-day scheduling, dual sensing and GFCI protection, which suits floors where surface temperature matters as much as air temperature.
Pros
- Works at 120V and 240V
- Air and floor sensing
- Built-in Class A GFCI with test function
Cons
- Focused on radiant underfloor systems
- GFCI needs testing after install
This BOWSEN suits radiant underfloor heating where the floor surface and the air both matter. It works at 120/240VAC with a 15A maximum current.
That means 1800W at 120V or 3600W at 240V when you size the load.
The dual sensing is the key feature. Air sensing watches the room, and floor sensing watches the floor mat.
That split helps you avoid a warm room with a cold floor, or a hot floor in a room that already feels warm.
It also has a built-in Class A GFCI, and BOWSEN says to test that function after install. GFCI tripping means leakage was detected, so treat a trip as a wiring or cable check, not a reset-and-forget event.
The 7-day schedule then handles comfort around your routine.
Mysa Smart Thermostat LITE for Electric Baseboard: Best for smart scheduling and remote control
- WiFi programmable control
- 7-day scheduling
- 120V to 240V line voltage
- HomeKit, Alexa and Google support
A smart pick for electric baseboard and related heaters when you want schedules, geofencing, vacation mode and app control without a subscription for core features.
Pros
- No subscription for scheduling and remote control
- Geofencing, away and vacation modes
- Works with HomeKit, Alexa and Google
Cons
- Needs 4 wires including neutral or second live wire
- Will not work on a two-wire switch loop
This Mysa suits electric baseboard, fan-forced, wall and convector heaters, plus radiant ceiling heat. It handles 120V or 240V line voltage up to 1900W at 120V or 3800W at 240V.
Local codes vary, so the wiring check comes before the feature check.
The smart side is strong for a line voltage thermostat. You get 7-day scheduling, remote control in the app, geofencing, away and vacation modes, and voice control through HomeKit, Alexa or Google.
Mysa says scheduling, remote control, voice control and geofencing are included without a subscription.
The catch is wiring. Mysa says it needs 4 wires, including a neutral or a second live wire.
It will not work on a two-wire switch loop or on 24V furnaces and central heat pumps. Use the compatibility checker before you order, and hire an electrician where code requires it.
Honeywell Aube Technologies TH115-A-120S 7-Day Programmable Line: Best for straightforward 7-day line voltage programming
- 7-day programmable line voltage control
- Up to four settings per day
- Early start function
- Temporary bypass override
A direct programmable choice for electric heating with four settings per day, early start and a temporary bypass when plans change.
Pros
- Four different settings per day
- Early start reaches programmed time
- Temporary bypass avoids changing the program
Cons
- No WiFi app control described
- Four-wire double pole installation described
This Honeywell Aube suits buyers who want 7-day programming without smart home controls. It offers up to four different settings for each day of the week.
That structure fits workdays, weekends and sleep hours without an app.
The early start function is a practical detail. It aims to reach the programmed temperature by the programmed time, rather than starting the heater at that time and letting the room catch up.
The temporary bypass also helps for a one-off override without changing the stored program.
Honeywell describes microprocessor-optimized control with 15 minute cycles and silent operation. The LCD can show 12 or 24 hour format and Fahrenheit or Celsius.
The trade-off is no app or voice control in the details here, so choose it for scheduling, not for remote access.
Honeywell Home X2P Programmable Thermostat: Best for low-voltage systems, not line voltage heat
- 5-2 day scheduling
- Backlit display
- 1 heat and 1 cool systems
- Does not work with electric baseboard heat
Useful for 1 heat and 1 cool low-voltage systems with 5-2 scheduling, but it is the wrong tool for direct line voltage baseboard circuits.
Pros
- Large screen and clear font
- 5-2 scheduling with non-programmable option
- No C-wire required
Cons
- Does not work with electric baseboard heat (120-240V)
- Not a line voltage thermostat
This Honeywell Home suits low-voltage 1 heat and 1 cool systems, not direct line voltage baseboard heat. It has 5-2 day scheduling and a non-programmable option.
The large screen and backlit display make daily changes plain.
The compatibility line matters most. Honeywell Home says it does not work with electric baseboard heat at 120-240V.
It fits single-stage forced air, hot water heat, single-stage heat pumps and 750 mV systems instead.
We included it as a caution pick because many shoppers search for a programmable thermostat and land on low-voltage models by mistake. If your heater is a 120/240V baseboard circuit, skip this one.
If your system is a standard low-voltage setup, the battery power and no C-wire requirement are handy.
Stelpro Line Voltage Thermostat: Best for simple baseboard and convector setback
- Non-programmable line voltage control
- 2500W rating
- One-click eco setback
- 1F thermistor sensing increments
A simple non-programmable line voltage thermostat for baseboards and convectors with eco setback and tight 1F increments.
Pros
- One-click eco mode setback
- Holds within 1F in 1F increments
- Simple two-wire install
Cons
- Not compatible with fan heaters or forced-air units
- No weekly schedule
This Stelpro suits electric baseboards and convectors with a simple two-wire install. It is rated to 2500W, with maximum loads of 1250W, 2160W and 2500W at 120V, 208V and 240V.
Those numbers help you match the circuit before you buy.
The eco mode gives you a one-click setback. Press it when you leave, then press again to return to your setting.
Thermistor sensing keeps the room in 1F increments, which is tighter than a basic mechanical dial.
The trade-off is no weekly schedule. It is also not compatible with fan heaters or forced-air units, which need the matching FF model.
For a steady routine and a baseboard circuit, that simplicity can be the right call.
LUX PSP511LC Programmable Thermostat: Best for low-voltage 5-2 programming, not line voltage
- 5-2 day programming
- Up to 4 periods per day
- 45F to 90F temperature control
- Not compatible with 120V/240 line voltage systems without transformers
A low-voltage programmable thermostat with speed dial and 5-2 schedules, included here as a warning pick because it is not for direct line voltage systems.
Pros
- Exclusive speed dial for quick programming
- Separate heating and cooling programs
- Keyboard lockout
Cons
- Not compatible with 120V/240 line voltage systems without transformers
- Not for multi-stage heat pumps or furnaces
This LUX PSP511LC suits low-voltage systems with 5-2 day programming. It programs up to 4 periods per day with separate programs for heating and cooling.
The speed dial is meant to make programming quicker.
Temperature control runs from 45F to 90F, and there is a keyboard lockout for shared spaces. The included 2 AA batteries cover control power, and the LCD shows the settings in a simple layout.
The warning is in the compatibility. LUX says it is not compatible with 120V/240 line voltage systems without transformers.
It also lists multi-stage heat pumps, multi-stage gas or oil furnaces and 3-wire hydronic systems as not compatible. For direct line voltage heat, use a true line voltage model instead.
LUX ELV4 Programmable Line Voltage Thermostat: Best for budget 5-2 line voltage schedules
- 5-2 day programmable line voltage control
- 4 program periods per day
- Vacation hold and temperature override
- For baseboard, cable and ceiling heat
A budget programmable line voltage option for baseboard, cable and ceiling heat with weekday and weekend programs and vacation hold.
Pros
- Separate weekday and weekend settings
- Vacation hold and temporary override
- Front battery access with low-battery indicator
Cons
- Not compatible with heating appliances with both element and blower fan
- No smart app control described
This LUX ELV4 suits baseboard, cable and ceiling heat with electronic 5-2 day programming. It gives 4 program periods per day and separate weekday and weekend settings.
That is enough structure for most work and sleep routines.
The useful extras are vacation hold, temperature override and a positive off switch. Front battery access and a low-battery indicator help when you check the thermostat during the season.
A wall plate is included, which helps when the old thermostat box is wider.
LUX says it is not compatible with heating appliances that contain both an electric heating element and a blower fan. That limits it to resistive heat loads without a fan.
The trade-off against smarter picks is no app control, so choose it for a simple line voltage schedule at a budget level.
KING ES230-R MAX22 Electronic Line Voltage Non-Programmable: Best for larger non-programmable heating circuits
- Non-programmable electronic control
- 22A maximum rating
- 208/240V, 3-wire install
- Comfort color backlight display
A simple non-programmable electronic thermostat for larger 208/240V circuits, with a 22A rating and a shallow design for wiring room.
Pros
- 22A maximum rating for larger circuits
- Simple up and down selection
- Memory backup for power outages
Cons
- Not programmable
- Single pole design with third wire to power display
This KING suits larger heating circuits where programmability is not needed. It is a 208/240V electronic thermostat with a 22A maximum rating.
That rating is the main reason to consider it over smaller non-programmable models.
Control is simple: up and down keys set the temperature. The comfort color backlight is blue at 65F and red at 75F, with color varying between those points.
The display can be read across the room, and memory backup helps after a power outage.
The install is 3-wire, with a single pole design and a third wire to power the display. KING says the shallow design allows more wiring room inside full electrical boxes.
The trade-off is no schedule, so it fits steady rooms and larger loads rather than setback routines.
Best line voltage programmable thermostat comparison: load, wiring and controls
The comparison below sorts the picks by the detail that ends most returns: voltage, load and wire count. A schedule cannot fix a load that is too high or a wire count that does not match.
Check those three items first, then compare app, schedule and display features.
| Product | Best for | Voltage | Full Load | Control Range | Our score |
|---|---|---|---|---|---|
| Honeywell TL7235A1003 Line Volt Pro Non-Programmable Digital | simple non-programmable digital control | 240 VAC | 15 A at 240VAC | 40 to 86 F | 9.6 |
| BOWSEN Programmable Thermostat for House Radiant Underfloor | radiant underfloor floors | 120/240VAC | 9.3 | ||
| Mysa Smart Thermostat LITE for Electric Baseboard | smart scheduling and remote control | 120V to 240V | 9.2 | ||
| Honeywell Aube Technologies TH115-A-120S 7-Day Programmable Line | straightforward 7-day line voltage programming | 120V line voltage model | 8.9 | ||
| Honeywell Home X2P Programmable Thermostat | low-voltage systems, not line voltage heat | 8.7 | |||
| Stelpro Line Voltage Thermostat | simple baseboard and convector setback | 8.7 | |||
| LUX PSP511LC Programmable Thermostat | low-voltage 5-2 programming, not line voltage | 8.5 | |||
| LUX ELV4 Programmable Line Voltage Thermostat | budget 5-2 line voltage schedules | 8.2 | |||
| KING ES230-R MAX22 Electronic Line Voltage Non-Programmable | larger non-programmable heating circuits | 208/240V | 8.0 |
A programmable thermostat saves energy only when the schedule matches your real routine. If you work from home, a deep daytime setback may feel worse than a shallow one.
If you are out all day, the same setback can help a lot.
Smart models add geofencing and vacation mode, which help when your return time moves. Basic 7-day and 5-2 models help when your week is fixed.
Non-programmable models help when you want one setting and no menus.
How we compared these line voltage thermostats
We compared the specs that control safety and fit, starting with voltage and load. Each product was checked for 120V, 208V or 240V use, maximum watts or amps, and whether the install is two-wire, three-wire or four-wire.
Those details decide if the thermostat can replace the one on your wall.
We then compared control style. Some picks are only set-and-hold, some use 5-2 or 7-day schedules, and some add WiFi, app and voice control.
We kept non-programmable and low-voltage models in the list only to flag the trade-off clearly, so you do not buy the wrong type by mistake.
We also looked at sensing and protection. Radiant floors need floor sensing and GFCI protection.
Baseboards and convectors often need tight increments and simple two-wire installs. Larger circuits need higher amp ratings.
Buyer patterns were weighed only after those hard limits were checked.
Can a line voltage programmable thermostat replace a mechanical thermostat? Choose by routine
Yes, a programmable line voltage thermostat can replace a mechanical one if the voltage, load and wiring match. The swap is easiest when the old box already has the same wire count and the new load rating covers the heater circuit.
Turn power off at the breaker before you open the box.
Look at your routine before you choose the control style. A fixed workweek suits 5-2 programming.
A different schedule every day suits 7-day programming. A smart model suits days when you leave earlier or later than planned.
If you want a simpler dial and no menus, our guide to the best line voltage mechanical thermostat covers that path. If you prefer not to program at all, read [What Is a Non Programmable Thermostat?
A Beginner's Guide](/what-is-a-non-programmable-thermostat/) first.
7-day schedules for different weekdays
Seven-day programming helps when Monday does not look like Friday. You can set a morning warm-up, a daytime setback, an evening comfort period and a sleep setback for each day.
The Honeywell Aube TH115 and the BOWSEN both use that structure.
5-2 schedules for workweek routines
Five-two programming helps when weekdays repeat and weekends differ. The LUX ELV4 uses that split for baseboard, cable and ceiling heat.
It is simpler to set up than seven separate days, and it still covers the main setback hours.
Smart schedules for changing days
Smart scheduling helps when your return time changes. The Mysa LITE uses geofencing to ease the heat when you leave and bring it back as you head home.
Vacation mode covers longer trips without a manual setback.
What voltage and load range do you need for line voltage electric heat?
Match the thermostat to the circuit voltage first. A 120V circuit and a 240V circuit are not interchangeable, even when the thermostat body looks the same.
The BOWSEN and Mysa both cover 120V and 240V, but their watt limits differ by voltage.
Check the load in watts or amps against the heater circuit. The Mysa is rated up to 1900W at 120V or 3800W at 240V.
The BOWSEN is rated up to 1800W at 120V or 3600W at 240V. The KING non-programmable model is rated to 22A at 208/240V.
If your circuit is 120V only, our best 120 volt thermostat guide narrows the field. If your system handles both heating and cooling, compare the best line voltage thermostat heat and cool options before you choose a heat-only model.
120 volt circuits
For 120V heat, confirm the watt limit at that voltage, not the higher 240V limit. A thermostat that handles 3800W at 240V may handle only 1900W at 120V.
That gap matters for baseboards and fan-forced heaters on a single circuit.
208 volt and 240 volt circuits
For 208V and 240V circuits, check amps as well as watts. The Stelpro lists separate maximum loads for 120V, 208V and 240V.
The KING lists a 22A maximum rating for larger 208/240V circuits. Use the exact circuit figure, not a close guess.
Radiant floor loads
For radiant floors, pair the load check with sensing. The BOWSEN uses air and floor sensors and a built-in GFCI.
Floor sensing helps protect the floor surface while air sensing keeps the room in range. Test the GFCI function after install.
How many wires does your line voltage thermostat need?
Count the wires before you order. A two-wire install is the simplest swap, and the Stelpro uses that layout for baseboards and convectors.
A three-wire install may power the display, as with the KING model. A four-wire install may be required for smart line voltage control, as with the Mysa LITE.
The Mysa needs 4 wires, including a neutral or a second live wire. It will not work on a two-wire switch loop.
That single detail can decide the purchase, so check the box or use the compatibility checker before you order.
If you see an old thermostat with only two wires, a non-programmable two-wire model may be the easier path. If you want smart control and the box has only two wires, you may need new wiring or a different model.
This is the point where many buyers should call an electrician.
Two-wire installs
Two-wire installs suit simple replacements for baseboards and convectors. The Stelpro is built around that swap and includes twist-on wire connectors for copper wires.
Keep the load under the stated maximum for your voltage.
Three-wire installs
Three-wire installs can power a display while switching the heater. The KING uses a third wire to power the display.
The shallow body also leaves more wiring room inside a full electrical box, which helps in tight installs.
Four-wire and smart installs
Four-wire installs suit smart models that need neutral or a second live wire. The Mysa app walks through each wire during setup.
Turn power off at the breaker, and hire an electrician where code requires it or if high-voltage wiring is beyond your comfort level.
Which heater type does each thermostat fit: baseboard, radiant, convector or fan-forced?
Different heaters need different sensing and loads. Baseboards and convectors often use simple two-wire line voltage control with tight temperature increments.
Radiant floors need floor sensing and GFCI protection. Fan-forced heaters need a model that allows that load type.
The BOWSEN is aimed at radiant underfloor heating. The Mysa covers electric baseboard, fan-forced, wall and convector heaters, plus radiant ceiling heat.
The Stelpro covers baseboards and convectors, but not fan heaters or forced-air units. The LUX ELV4 covers baseboard, cable and ceiling heat, but not a heater with both an element and a blower fan.
If you own a Honeywell system already, our best honeywell line voltage thermostat guide helps you compare those models by voltage and control style. Brand loyalty should come after voltage, load and wire count, not before them.
Electric baseboard heat
For baseboards, look for a clear load limit and a schedule that matches your routine. The Mysa and LUX ELV4 both offer schedules for baseboard-style heat.
The Stelpro offers a one-click setback instead of a weekly program.
Radiant underfloor heat
For radiant floors, choose floor sensing over a basic air-only control. The BOWSEN pairs air and floor sensors with GFCI protection.
That pairing matters because the floor can feel cold even when the air reaches the setpoint.
Convectors and wall heaters
For convectors and wall heaters, check the stated load and the install type. The Mysa lists convector and wall heaters in its supported uses.
The Stelpro lists baseboards and convectors and excludes fan heaters.
Fan-forced heaters
For fan-forced heaters, read the compatibility line closely. The Mysa lists fan-forced heaters in its uses.
The Stelpro excludes fan heaters and forced-air units. The LUX ELV4 excludes appliances with both an element and a blower fan.
How should you set up and care for a line voltage programmable thermostat?
Set up the schedule after the wiring check, not before it. Start with the comfort temperature you want when you are home and awake.
Then set a setback for sleep, a setback for time away, and a warm-up time before you return.
Use the early start or smart warm-up features where available. The Honeywell Aube has early start.
The Mysa can warm the room before you get home. Those features matter more in large rooms or cold weather, when the heater needs time to catch up.
Test safety features after install. The BOWSEN has a GFCI test function, and BOWSEN says to test it after installing the thermostat.
A GFCI trip means leakage was detected, so check the wiring and floor cable instead of ignoring the alarm.
First week setup
In the first week, keep the schedule simple. Use one daytime setback and one sleep setback.
Watch whether the room reaches the setpoint by the time you need it. Adjust the warm-up time before you change the comfort temperature.
Seasonal care
At the end of the heating season, use the standby or off switch where available. The BOWSEN has an ON/STANDBY switch for shutdown at the end of the heating season.
The LUX ELV4 has a positive off switch. That step keeps the circuit in a known state for summer.
Troubleshooting trips and alarms
Treat repeated GFCI trips as a wiring issue. BOWSEN says a trip means leakage was detected and advises shutting down main power and reconnecting wires.
Check for leakage and short circuits before you reset the GFCI toggle.
The best line voltage programmable thermostat for your home
Pick the BOWSEN if you heat radiant underfloor floors and need dual sensing with GFCI protection. Pick the Mysa LITE if you want WiFi scheduling, geofencing and voice control on baseboard or convector heat.
Pick the Honeywell Aube TH115 if you want plain 7-day programming without an app.
Pick the LUX ELV4 if you want a budget 5-2 line voltage schedule for baseboard, cable or ceiling heat. Pick the Stelpro or KING if you prefer set-and-hold control with no weekly program.
Skip the Honeywell Home X2P and LUX PSP511LC for direct line voltage heat, because both are low-voltage models in this list.
Before you order any best line voltage programmable thermostat, confirm voltage, load and wire count. When those three match, the schedule style becomes a comfort choice instead of a risk.
That order of checks is the fastest way to buy the right thermostat the first time.
Our top 3 picks at a glance
-
1
Best for simple non-programmable digital controlHoneywell TL7235A1003 Line Volt Pro Non-Programmable Digital
9.6/10 our score
See it on Amazon -
2
Best for radiant underfloor floorsBOWSEN Programmable Thermostat for House Radiant Underfloor
9.3/10 our score
See it on Amazon -
3
Best for smart scheduling and remote controlMysa Smart Thermostat LITE for Electric Baseboard
9.2/10 our score
See it on Amazon
About this guide: Our look at line voltage programmable thermostats draws on maker specs, materials and what owners report. See how we research.



