Best picks

Best 120 Volt Heat Only Thermostats: Top 9 Picks (November 2026)

Updated on · By the Thermostat Home team

The best 120 volt heat only thermostats include the Cadet F Series Double Pole Built-In Baseboard for Cadet F Series baseboards, the Honeywell TL7235A1003 Line Volt Pro Non-Programmable Digital for precise digital wall control, and the Honeywell Home Digital Non-Programmable Thermostat for Electric for quiet baseboard and convector heat.

On this page (7 sections)
  1. 120 volt heat only thermostat options by heater type
  2. How to compare these 120 volt heat only thermostats
  3. Will a 120 volt heat only thermostat work with your heater?
  4. Single pole or double pole: which do you need?
  5. Digital or dial control: which is easier to live with?
  6. What load limits and temperature ranges mean in daily use
  7. Verdict: which 120 volt heat only thermostat should you buy?

The best 120 volt heat only thermostat for most homes is the Cadet F Series Double Pole Built-In Baseboard, because it mounts directly to a Cadet F Series heater at 120 volts and avoids extra wiring. For a wall-mounted digital option, the Honeywell Home RLV3120A is a strong pick for baseboards and convectors.

A 120 volt heat only thermostat controls heating equipment only. It does not run cooling, and it does not manage a heat pump system.

That simple job is why these controls still matter. Electric baseboards, convectors, wall heaters and heat cable all need a control matched to their voltage, amperage and wiring.

Our score weighs specs, features and buyer feedback against what you are shopping for. We compared voltage range, load limits, control style and heater compatibility across all nine picks.

Our picks at a glance

  1. 1 Cadet F Series Double Pole Built-In Baseboard
    Best for Cadet F Series baseboards

    Cadet F Series Double Pole Built-In Baseboard

    9.6/10 our score

    See it on Amazon
  2. 2 Honeywell TL7235A1003 Line Volt Pro Non-Programmable Digital
    Best for precise digital wall control

    Honeywell TL7235A1003 Line Volt Pro Non-Programmable Digital

    9.6/10 our score

    See it on Amazon
  3. 3 Honeywell Home Digital Non-Programmable Thermostat for Electric
    Best for quiet baseboard and convector heat

    Honeywell Home Digital Non-Programmable Thermostat for Electric

    9.4/10 our score

    See it on Amazon
  1. 4BN-LINK Reptile Thermostat Temperature Controller

    BN-LINK Reptile Thermostat Temperature Controller

    Best for heat mats and small enclosures
    Check it
  2. 5Dr. Infrared Heater DR-001 Wall Thermostat

    Dr. Infrared Heater DR-001 Wall Thermostat

    Best for high-wattage wall heat
    Check it
  3. 6KETOTEK Digital Thermostat Outlet Plug

    KETOTEK Digital Thermostat Outlet Plug

    Best for plug-in heating and cooling control
    Check it
  4. 7Inkbird ITC-308 Digital Temperature Controller Thermostat

    Inkbird ITC-308 Digital Temperature Controller Thermostat

    Best for dual relay heating and cooling
    Check it
  5. 8Cadet Single Pole Built-In Thermostat Kit

    Cadet Single Pole Built-In Thermostat Kit

    Best value for Cadet single pole setups
    Check it
  6. 9ThermaCord 120V Heat Cable Controller

    ThermaCord 120V Heat Cable Controller

    Best for outdoor heat cable freeze protection
    Check it

120 volt heat only thermostat options by heater type

The best pick depends on your heater first. Built-in models suit Cadet baseboards, wall models suit hardwired baseboards and convectors, and plug-in models suit corded heaters and heat mats.

For a broader look at 120 volt controls, our best 120 volt thermostat guide covers more formats. Our best 120 volt thermostat honeywell guide narrows the field to Honeywell models.

Range also separates the choices in a practical way. Room controls here cluster from the low 40s to the high 80s or 90s Fahrenheit.

Specialty plug-in controls stretch far wider for greenhouses, incubators and fermentation, while the outdoor heat cable control narrows to a fixed freeze protection band.

1

Cadet F Series Double Pole Built-In Baseboard: Best for Cadet F Series baseboards

Cadet F Series Double Pole Built-In Baseboard, 120 volt heat only thermostats
9.6/10Our score
  • 22 Amp, 120/208/240 Volt
  • 45 to 80 F range
  • Large twist dial
  • Mounts to either end of heater

A built-in double pole thermostat made only for Cadet F Series electric baseboard heaters. It replaces the detachable end plate so control sits right at the heater.

See it on Amazon

Pros

  • No extra wiring needed
  • Large easy twist dial
  • White finish blends with heater

Cons

  • Cadet F Series heaters only
  • Manual dial, no digital readout

The Cadet F Series Double Pole Built-In Baseboard suits owners who already have Cadet F Series electric baseboard heaters. It mounts to either end of the heater and replaces the detachable end plate.

That design removes the need for extra wiring to a wall switch.

Its 22 amp rating covers 120, 208 and 240 volt circuits. The temperature range runs 45 to 80 F, which suits room heating rather than freeze protection.

A large twist dial makes adjustment simple, even with gloves or at a glance.

The white finish is designed to match the baseboard heater and blend in. Control sits right at the unit, so you set the temperature where the heat comes from.

That can be a plus in a bedroom or office, and a minus if you prefer control from the door.

Daily use is simple because there is no display to program and no schedule to manage. Double pole control also gives a positive OFF position for warm weather.

You turn it fully off rather than relying on the lowest dial mark.

Trade-off: this is a Cadet-only control. It does not work with other brands of baseboard heater.

If your heater is not a Cadet F Series model, choose a wall thermostat instead.

Cadet F Series Double Pole Built-In BaseboardCheck it on Amazon
2

Honeywell TL7235A1003 Line Volt Pro Non-Programmable Digital: Best for precise digital wall control

Honeywell TL7235A1003 Line Volt Pro Non-Programmable Digital, 120 volt heat only thermostats
9.6/10Our score
  • Digital non-programmable
  • 40 to 86 F range
  • On-demand backlight
  • Heating indicator

A wall-mount digital line volt thermostat with electronic control, backlight and a heating indicator. It suits buyers who want a clear readout rather than a dial.

See it on Amazon

Pros

  • Digital display is easy to read
  • Backlight for low light
  • Heating indicator at a glance

Cons

  • 240-volt focus in its title
  • Non-programmable, no schedules

The Honeywell TL7235A1003 suits buyers who want a digital wall thermostat with electronic temperature control. It is non-programmable, so there are no schedules to set.

You set the temperature and the thermostat holds it.

Honeywell says the on-demand backlight makes it easy to read in various lighting conditions. A heating indicator gives at-a-glance confirmation that the heat is on.

Soundproof operation reduces the clicking noise heard with conventional thermostats.

The control range runs 40 to 86 F with a differential of 1 degree F. That tight differential means the heater cycles more precisely than a wide-swing mechanical dial.

The unit is hardwired and wall mounted, with a plastic white case.

In daily use, the digital readout removes guesswork about where a dial is set. You can confirm the target temperature and see heat status without touching the control.

The compact wall footprint also suits standard switch locations.

Trade-off: this model is listed as a 240-volt thermostat. Confirm your circuit voltage before choosing it for a 120 volt heater.

If you need a model clearly rated for 120 volt circuits, the Honeywell Home pick below lists 120 volt compatibility.

Honeywell TL7235A1003 Line Volt Pro Non-Programmable DigitalCheck it on Amazon
3

Honeywell Home Digital Non-Programmable Thermostat for Electric: Best for quiet baseboard and convector heat

Honeywell Home Digital Non-Programmable Thermostat for Electric, 120 volt heat only thermostats
9.4/10Our score
  • Line volt heating only, 240V/120V
  • TRIAC silent switching
  • Accuracy of plus or minus 0.27 F
  • 2-wire connection

A digital non-programmable thermostat for electric baseboards and convectors with TRIAC switching. Honeywell Home says it runs 100 percent silent with no clicking.

See it on Amazon

Pros

  • Silent TRIAC switching
  • Very tight temperature accuracy
  • Simple 2-wire install

Cons

  • Cannot be used with fan-forced convector
  • Non-programmable

The Honeywell Home Digital Non-Programmable Thermostat suits electric baseboard heaters and convectors. It works on line volt heating only at 240 volts or 120 volts with a 2-wire connection.

The slim design fits small spaces where a larger thermostat will not fit.

Honeywell Home says accuracy reaches plus or minus 0.27 F with baseboards and convectors. TRIAC switching makes it 100 percent silent, with no clicking noise.

An on-screen heating power indicator shows at a glance when power is being used.

Maximum load is 2,000 watts at 240 volts, or 8.3 amps resistive. Minimum load is 200 watts at 240 volts, so it can control smaller baseboards.

Push-button operation makes adjustment easy, and mounting hardware is included.

That minimum load matters in small rooms where a short baseboard may not draw enough power for some controls. The 2-wire non-polarized connection also keeps installation straightforward for replacement installs.

Trade-off: it cannot be used with a fan-forced convector. It is also non-programmable, so you set one temperature and hold it.

For programmable control, you would need a different type of thermostat.

Honeywell Home Digital Non-Programmable Thermostat for ElectricCheck it on Amazon

The BN-LINK Reptile Thermostat suits heat mats, seed starting, germination, greenhouses, incubators, brooders, brewing and reptile tanks. It controls heating devices only, such as heating pads, seedling heat mats and heat lamps.

Rated voltage is 120 VAC at 60 hertz with a maximum load of 8.3 amps or 1000 watts. The control range runs 40 to 108 F.

You program the desired temperature or switch between Fahrenheit and Celsius using three buttons.

A bright LED display and LED heating and power indicator lights show status, even in darkness. A hanging tab helps with placement.

The unit has a 3.94 ft three-prong power cord and a 4.92 ft temperature probe for flexible sensor placement.

In practice, the probe placement decides what temperature the controller actually manages. Placing it at mat level or inside the enclosure gives steadier control than leaving it in open room air.

The corded format also keeps the controller away from the heat source.

Trade-off: no heat mat is included. The controller only switches power to your heating device.

It is also not a hardwired room thermostat, so it does not replace a wall control for baseboard heat.

BN-LINK Reptile Thermostat Temperature ControllerCheck it on Amazon
5

Dr. Infrared Heater DR-001 Wall Thermostat: Best for high-wattage wall heat

Dr. Infrared Heater DR-001 Wall Thermostat, 120 volt heat only thermostats
9.1/10Our score
  • 120-277V, 28A maximum
  • 3360W at 120V
  • 41 to 90 F range
  • C and F dials included

A wall-mount thermostat for single or double pole circuits from 120 to 277 volts. Its large knob and positive OFF position make it simple to use.

See it on Amazon

Pros

  • Handles high wattage at 120V
  • Large knob is easy to adjust
  • Flush wall-mount design

Cons

  • Analog knob, no digital readout
  • Wired installation required

The Dr. Infrared Heater DR-001 suits high-wattage heating systems wired at 120 to 277 volts.

It works with single or double pole circuits up to 28 amps maximum. At 120 volts, it handles 3360 watts.

The control range runs 41 to 90 F, or 5 to 32 C. Both C and F control dials are included.

A large knob allows easy adjustment, and the wall mount design sits flush against the wall.

Double terminals provide a positive OFF position. That OFF position matters when you want heat fully off in warm weather, rather than just set to the lowest temperature.

The wattage figures scale with voltage, reaching 5824 watts at 208 volts and 6720 watts at 240 volts. That headroom suits larger wall heaters that would exceed the limits of smaller digital or plug-in controls.

The wide range also covers both mild freeze protection and warm room heating.

Trade-off: this is an analog knob control with no digital readout. You set a dial position rather than a number.

If you want precise digital settings, a digital wall model or plug-in controller may suit you better.

Dr. Infrared Heater DR-001 Wall ThermostatCheck it on Amazon
6

KETOTEK Digital Thermostat Outlet Plug: Best for plug-in heating and cooling control

KETOTEK Digital Thermostat Outlet Plug, 120 volt heat only thermostats
9.0/10Our score
  • 120V, 15A output
  • -40 to 120 C range
  • 9.8 ft probe
  • Heating and cooling modes

A plug-and-play outlet thermostat with a 3-meter sensor for greenhouses, reptiles, fermentation and heaters. You set start and stop temperatures and it switches automatically.

See it on Amazon

Pros

  • Plug-and-play, no wiring
  • Heating and cooling modes
  • Timer and countdown functions

Cons

  • Temperature and timer cannot run together
  • Accuracy is plus or minus 1 C

The KETOTEK Digital Thermostat Outlet Plug suits greenhouses, reptiles, fermentation, incubators, terrariums, freezers, refrigerators and heaters. It is plug-and-play, so you plug in your device, set start and stop temperatures, and let it switch automatically.

Power supply is 100 to 250 volts AC with output up to 15 amps at 120 volts. The temperature range runs -40 to 120 C, or -40 to 248 F, with control accuracy of plus or minus 1 C or plus or minus 2 F.

A 3-meter NTC sensor gives rapid response.

It switches between heating and cooling modes based on your settings. For heating, set start below stop.

For cooling, set start above stop. Timing modes F01 to F04 add cycle timer and countdown functions from zero to 99 hours 59 minutes.

Built-in memory retains settings if power goes out, and temperature calibration allows finer adjustment. That helps when a sensor sits in a different spot from the space you care about most, such as inside a terrarium rather than in the room.

Trade-off: temperature control and timing cannot be used at the same time. It is also a plug-in outlet, not a hardwired wall thermostat, so it suits corded devices rather than baseboard circuits.

KETOTEK Digital Thermostat Outlet PlugCheck it on Amazon
7

Inkbird ITC-308 Digital Temperature Controller Thermostat: Best for dual relay heating and cooling

Inkbird ITC-308 Digital Temperature Controller Thermostat, 120 volt heat only thermostats
9.0/10Our score
  • Dual relay for heating and cooling
  • Maximum 1100W at 110V
  • Dual display window
  • High and low temperature alarms

A plug-in dual relay controller that can power heating or refrigeration equipment as conditions change. It shows measured and set temperature at the same time.

See it on Amazon

Pros

  • Dual relay flexibility
  • Alarms for high and low temperature
  • Compressor delay protection

Cons

  • Plug-in format, not hardwired
  • Maximum load limits heater size

The Inkbird ITC-308 suits buyers who need one controller for both heating and cooling equipment. Its dual relay can power refrigeration and heating equipment as conditions change.

That makes it useful for freezers, heating wraps and exhaust fans.

The temperature control range runs -58 to 248 F with resolution of 0.1 degrees. Accuracy is plus or minus 2 F in the common range.

A dual display window shows measured temperature and set temperature at the same time.

Maximum output load is 1100 watts at 110 volts, or 10 amps. Buzzer alarms sound for high and low temperature, and for sensor malfunction.

Compressor delay protection helps protect refrigeration equipment.

The dual display is useful because you can see drift without switching screens. The included probe, socket and controller panel also mean the setup is plug-and-play for corded equipment.

Custom delay settings add protection that simpler plug-in controls do not offer.

Trade-off: the load limit caps the size of heater or cooler you can run. This is a plug-in controller with a probe and socket, not a hardwired line volt wall thermostat.

Choose it for corded equipment, not for a baseboard circuit.

Inkbird ITC-308 Digital Temperature Controller ThermostatCheck it on Amazon
8

Cadet Single Pole Built-In Thermostat Kit: Best value for Cadet single pole setups

Cadet Single Pole Built-In Thermostat Kit, 120 volt heat only thermostats
8.6/10Our score
  • 22 Amp, 240/208/120 Volt
  • 45 to 80 F range
  • Large twist dial
  • Mounts to either end of heater

The single pole version of Cadet's built-in kit for F Series baseboard heaters. It offers the same simple dial control at a simpler price point.

See it on Amazon

Pros

  • No extra wiring for Cadet heaters
  • Simple twist dial
  • Matches Cadet heater finish

Cons

  • Cadet F Series heaters only
  • Single pole only

The Cadet Single Pole Built-In Thermostat Kit suits Cadet F Series electric baseboard heaters. It mounts to either end of the heater, which eliminates the need for extra wiring.

Control sits right at the baseboard.

The temperature range runs 45 to 80 F with a large, easy twist dial. The white color is designed to match the baseboard heater and blend in.

The compact design keeps the control unobtrusive.

Rated at 22 amps, it covers 240, 208 and 120 volt circuits. That range makes it flexible for different Cadet heater installations.

Single pole wiring uses a 2-wire low setting, and turning it fully counterclockwise puts it in low position.

For daily use, the low position detail matters when you want minimal heat rather than a full off switch. The dial format also means no batteries, no display and no programming steps.

It is a fit-and-forget control once the preferred setting is found.

Trade-off: it is made for Cadet F Series heaters only, sold separately. Single pole only is another limit.

If your circuit needs double pole control, the double pole Cadet model above is the match.

Cadet Single Pole Built-In Thermostat KitCheck it on Amazon
9

ThermaCord 120V Heat Cable Controller: Best for outdoor heat cable freeze protection

ThermaCord 120V Heat Cable Controller, 120 volt heat only thermostats
8.3/10Our score
  • 120 volt, 15 amp
  • Turns on at 37 F, off at 50 F
  • UL listed
  • Weatherproof outdoor design

A weatherproof outdoor controller that turns heat cables on at 37 F and off at 50 F. It works with all brands and types of heat cable and heat tape.

See it on Amazon

Pros

  • Rated for outdoor exposure
  • Works with all heat cable brands
  • Fits inside exterior outlets

Cons

  • Fixed on and off temperatures
  • Made for heat cable, not room heat

The ThermaCord 120V Heat Cable Controller suits roof de-icing cables, heat tape and other electrical devices that need freeze protection. It turns heat cables on at 37 F and off at 50 F.

You do not set a custom temperature.

Rated at 120 volts and 15 amps, it uses a heavy duty bi-metal thermostat with 14 AWG wire. It is UL listed and weatherproof for outdoor exposure.

Radiant Solutions Company says it fits inside all exterior outlets.

It works with all brands and types of heat cable and heat tape. That universal fit makes it simple for pipe freeze protection, roof cables and other outdoor heating loads.

The fixed thresholds are the point of the design. Heat runs only when freezing is likely and stops once temperatures rise well above freezing.

That avoids the energy use of leaving heat cable on all winter and removes daily adjustment.

Trade-off: the on and off temperatures are fixed. It is not a room thermostat and cannot hold a chosen indoor temperature.

For room heating, choose a wall or built-in thermostat from the earlier picks.

ThermaCord 120V Heat Cable ControllerCheck it on Amazon

How to compare these 120 volt heat only thermostats

ProductBest forVoltageAmpsRangeOur score
Cadet F Series Double Pole Built-In BaseboardCadet F Series baseboards120/208/240 Volt22 Amp45-80 F9.6
Honeywell TL7235A1003 Line Volt Pro Non-Programmable Digitalprecise digital wall control240-Volt40-86 F9.6
Honeywell Home Digital Non-Programmable Thermostat for Electricquiet baseboard and convector heat240V/120V9.4
BN-LINK Reptile Thermostat Temperature Controllerheat mats and small enclosures120VAC40-108 F9.2
Dr. Infrared Heater DR-001 Wall Thermostathigh-wattage wall heat120-277V41-90 F9.1
KETOTEK Digital Thermostat Outlet Plugplug-in heating and cooling control120 volts-40 to 120 C9.0
Inkbird ITC-308 Digital Temperature Controller Thermostatdual relay heating and cooling-58 to 248 F9.0
Cadet Single Pole Built-In Thermostat Kitvalue for Cadet single pole setups240/208/120 Volt22 Amp45-80 F8.6
ThermaCord 120V Heat Cable Controlleroutdoor heat cable freeze protection120 volt15 amp8.3

We compared voltage ratings, amperage and wattage limits, temperature range, and control style for every pick. We also checked heater compatibility, pole type, and whether the control is built-in, wall-mounted or plug-in.

Specs came from each product's title, bullets and manufacturer details. Scores reflect how well each control fits a 120 volt heat only search, not overall product quality alone.

Buyer feedback helped separate close picks. Models with consistent reports of silent operation, easy setup or accurate control scored higher for room heating use.

What the comparison table does not show

The table helps you scan voltage, load and range at a glance. It cannot show sensor placement, probe length or whether a control sits at the heater, on the wall or at an outlet.

Mounting format changes daily use more than a small spec difference. A built-in dial is reached at the baseboard, a wall unit is reached at the switch location, and a plug-in probe is placed where temperature matters most.

Wiring format also changes the install. Hardwired models need breaker and wire work, while plug-in models need only an outlet and a probe location.

Will a 120 volt heat only thermostat work with your heater?

Yes, if the voltage, amperage and pole type match your heater. A 120 volt heat only thermostat must be matched to compatible 120 volt electric heating equipment.

Start with the heater label. Check volts, amps or watts, and whether the circuit is single pole or double pole.

Then match the thermostat to those numbers.

Built-in baseboard controls

Built-in controls mount to the heater itself. The Cadet models in this guide are made only for Cadet F Series heaters.

Mounting to either end of the heater removes extra wiring. The trade-off is control at the heater, not at the door.

Wall-mounted line volt controls

Wall controls wire into the heater circuit. The Honeywell and Dr.

Infrared models in this guide use this format.

They suit baseboards, convectors and wall heaters where a wall switch location already exists. Confirm pole type before you buy.

Plug-in outlet controls

Plug-in controls switch a corded device through an outlet. The BN-LINK, KETOTEK and Inkbird models in this guide use this format.

They suit heat mats, greenhouse heaters, incubators and fermentation setups. They do not replace a hardwired wall thermostat.

Single pole or double pole: which do you need?

Double pole units such as the Cadet F Series Double Pole and the Dr. Infrared DR-001 control two hot wires.

Single pole units such as the Cadet Single Pole Built-In control one hot wire. Your heater and wiring decide which you need.

When double pole helps

Double pole control can provide a positive OFF position. That is useful in warm weather when you want heat fully off.

It also suits 240 volt circuits that run two hot wires. Confirm the heater rating before choosing.

When single pole is enough

Single pole suits many 120 volt baseboard circuits. The Cadet single pole kit covers 120 volt Cadet heaters at 22 amps.

Simpler wiring can mean a simpler install. Never change pole type without checking heater instructions and electrical rules.

Digital or dial control: which is easier to live with?

Digital controls show a number. Dial controls show a position.

Both can hold a steady temperature when sized correctly.

Digital wall thermostats

The Honeywell TL7235A1003 and Honeywell Home RLV3120A show digital temperatures. The RLV3120A adds silent TRIAC switching and an on-screen heating indicator.

Digital units suit buyers who want precise settings. They are non-programmable in this guide, so there are no schedules to manage.

Dial and knob controls

The Cadet built-in models use a large twist dial. The Dr.

Infrared DR-001 uses a large knob with C and F dials.

Dial controls are simple and easy to adjust. You may need a separate thermometer to find the setting that holds your target temperature.

What load limits and temperature ranges mean in daily use

Wattage and amperage caps decide which heaters a control can run. Exceeding a limit can damage the control or trip a breaker.

The Honeywell Home RLV3120A caps at 2,000 watts at 240 volts. The Dr.

Infrared DR-001 handles 3360 watts at 120 volts. Plug-in models cap at 1000 to 1100 watts.

Temperature range decides the job. Room controls run roughly 40 to 90 F.

Freeze protection controls such as the ThermaCord turn on at 37 F and off at 50 F, with no custom setting.

If you need cooling as well as heat, a heat only unit will not work. See our best line voltage thermostat heat and cool guide for dual-mode options.

Our best line voltage thermostat heat only guide covers more heat only line volt models, and our best 24 volt thermostat heat only guide covers low-voltage systems.

Matching range to the space you are heating

A narrow room range is enough when the goal is comfort. A range starting near 40 F suits occupied rooms that should never drop to freezing.

Wider plug-in ranges suit work that needs cold storage, fermentation or incubation. Those jobs may need temperatures well below room level or well above it.

Fixed thresholds suit outdoor protection where comfort is not the goal. The ThermaCord pattern keeps heat cable active only around freezing conditions.

Verdict: which 120 volt heat only thermostat should you buy?

Pick the Cadet F Series Double Pole Built-In Baseboard if you have a Cadet F Series heater and want control at the unit with no extra wiring. Pick the Honeywell Home RLV3120A if you want silent digital wall control for baseboards or convectors on 120 or 240 volts.

Pick the Dr. Infrared DR-001 for high-wattage wall heat at 120 volts.

Pick a plug-in model such as the BN-LINK or KETOTEK for heat mats and corded heaters. Pick the ThermaCord only for outdoor heat cable freeze protection.

Our score weighs specs, features and buyer feedback against what you are shopping for. Match voltage, amperage and pole type first, then choose the control style you prefer.

Our top 3 picks at a glance

  1. 1 Cadet F Series Double Pole Built-In Baseboard
    Best for Cadet F Series baseboards

    Cadet F Series Double Pole Built-In Baseboard

    9.6/10 our score

    See it on Amazon
  2. 2 Honeywell TL7235A1003 Line Volt Pro Non-Programmable Digital
    Best for precise digital wall control

    Honeywell TL7235A1003 Line Volt Pro Non-Programmable Digital

    9.6/10 our score

    See it on Amazon
  3. 3 Honeywell Home Digital Non-Programmable Thermostat for Electric
    Best for quiet baseboard and convector heat

    Honeywell Home Digital Non-Programmable Thermostat for Electric

    9.4/10 our score

    See it on Amazon

Frequently asked questions

What is a 120 volt heat only thermostat?

It is a thermostat that controls only heating equipment wired at 120 volts, such as electric baseboards, convectors and some wall heaters. It does not control cooling or a heat pump.

Check the heater voltage and amperage before you buy, and confirm the thermostat matches your pole type.

Can a 120 volt heat only thermostat control a baseboard heater?

Yes, many models in this guide are made for electric baseboard heaters and convectors. The Cadet built-in models mount directly to Cadet F Series heaters.

Wall models such as the Honeywell Home RLV3120A are made for baseboards and convectors on 120 or 240 volts.

What is the difference between single pole and double pole?

Single pole controls one hot wire, while double pole controls two hot wires and can provide a positive OFF position. Your heater and wiring decide which type you need.

Do not swap pole types without checking the heater instructions and local electrical rules.

Are plug-in thermostats the same as hardwired thermostats?

No. Plug-in models such as the BN-LINK and KETOTEK switch power to a corded heater or heat mat through an outlet.

Hardwired models such as the Cadet and Honeywell wall units are wired directly into the heater circuit.

Choose the format that matches your heater.

Why is a heat pump thermostat different?

A heat pump thermostat manages both heating and cooling, plus heat pump modes and auxiliary heat. A heat only thermostat cannot run cooling equipment.

If you have a heat pump, read our guide on [What Is a Heat Pump Thermostat?

The Complete Guide](/what-is-a-heat-pump-thermostat/) before choosing.